Key Attributes.
Product Description
The single port Power Over Ethernet (PoE) DC Power Injector eliminates the need for a PoE enabled equipment, such as IP Camera, IP Telephones, Wireless LAN and Bluetooth Access Points, etc.. The injector is typically installed near the Ethernet hub and connected to a remote PoE device through a single Ethernet Cat 5 cable up to 100meters / 330feets . The injector can support an advanced 802.3af or nonstandard (optional) compliant device which supporting the standard PoE pin out
(Pins 4&5 Power + / Pins 7&8 Power -)
Technical Specifications:
LAN Data Rates:
--10/100 Mbps (802.3 10Base-T/802.3u 100Base-T)
Input Power Requirements:
--Input voltage ..................... 100 VAC to 240 VAC
--Input frequency...........................47 Hz to 63 Hz
Power over Ethernet Output:
--Pin Assignment and Polarity...4/5 (V+),7/8 (V-)
--Output Power.................please refer to ordering information
--
Efficiency.........................................75% min
--Short circuit protection................ auto recovery
--Over current protection................ auto recovery
Front Panel Indicators
--Power Indicator…….DC Power Outout (Green)
--PoE Indicator…………..….PD Statues (Green)*
Environmental Conditions:
--Operating temperature ............... …0? to 50?
--Cooling ................................ free air convection
--Storage temperature ............... -20? to +85?
--Operating Humidity...90% max non-condensing
Mechanical Specifications:
--Case Material…………….………………..Iron
--Case Color……………………………….Black
--Net Weight………………….250g approx. / unit
--Dimensions………70(W) x 35(H) x 100 (L) (mm)
Connectors:
--AC Inlet……………………………………IEC-J-4
--LAN……………………………….Shielded RJ-45
*PoE LED Indicator description, only valid for advanced 802.3af application:
LED Pattern
Port Status
OFF
Port open or Non-Powered Device
ON
Port On
FLASH
Unmatched PD
RJ-45 Connectors and Pinout:
RJ-45
TYPE
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
IN
DATA
RX+
RX-
TX+
NC
NC
TX-
NC
NC
OUT
DATA+PWR
RX+
RX-
TX+
VDC+
VDC+
TX-
VDC-
VDC-
Ordering Information:
Part Number
Supported Standard
Output Voltage
Output Current
Output Power
Remark
FR100S
IEEE 802.3af
48V
0.35A max
15.4W max
default
FR100
IEEE 802.3af
48V
0.54A max
25W max
default
FR100B
Non-standard
48V
0.60A max
30W max
optional
FR100C
Non-standard
24V
1.20A max
30W max
optional
Company Profile
| |
Business Type: |
Fiberroad technology co., limited was established in 2005, we designs and manufactures data communications products which provide connectivity solutions between copper and fiber resulting in communications links, also provide full solutions of fiber optic communication system to all of out customers, special for mobile system. telecom system and power control system etc.
we are the leader of china's fttd market, more and more our customers connected to internet by our fiber optic products |
| |
Comapany: |
Fiberroad technology co., limited |
| |
Address: |
6/f north, antong building, 207#, meihua rd, futian district |
| |
City: |
Shenzhen |
| |
Zip/Postal: |
518049 |
| |
Country: |
China |
