F/nf type electric plating thickness gauge

Key Attributes.

FEATURES * It meets the standards of both ISO2178 and ISO-2361as well as DIN, ASTM and BS. Suitable for the laboratory and for use in harsh field conditions. * The F probes measure the thickness of non-magnetic materials (e.g. paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome etc.) on magnetic materials (e.g. iron, nickle etc.) . often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminium tile, some alloy tile, paper etc. * The N probes measure the thickness of non-magnetic coatings on non-magnetic metals. It is used on anodizing, varnish, paint, enamel, plastic coatings, powder, etc. applied to aluminum, brass, non-magnetic stainless steel, etc. SPECIFICATIONS Display:4 digits, 10 mm LCD Range: 0~1000 um/0~40mil Resolution: 0.1 um (0~99.9um) 1 um (over 100um) Accuracy:±1~3%n or 2.5 um or 0.1mil (Whichever is the greater) PC interface: with RS-232C interface RS-232C cable & software: not included (The above are optional accessories) Power supply: 4x1.5 AAA(UM-4) battery Operating condition: Temp. 0~40?, Humidity <80% Size:126x65x27 mm (5.0x2.6x1.1 inch) Weight: about 120 g if 1 probe about 160g if 2 probes (not including batteries) Accessories: Carrying case ................... 1 pc. Operation manual ................ 1 pc. F probe (if F type) .............1 pc. N probe (if N type).... ..........1 pc. Calibration foils................1set Substrate (Iron) ...............1 pc. ( if F type) Substrate (Aluminium).............1 pc. (If N type)