Key Attributes.
Product Description
40W CO2 Laser Power Supply, 40 watt power source for cutting plotter, 40W laser tube driver for laser engraving
1. Product Features:
1. This laser power supply adopts zero current and half bridge soft switch circuit, it makes the power supply have high efficiency and quick response speed. Thus it is easy to match with CO2 laser tube made by any factories.
2. This laser power supply is easy to be controlled, it is suitable to High or Low level signal. The TTL level can control start or stop of laser output. While the power supply has emergency protection switch which can indicate water through and ventilation.
3. The laser output power can be adjusted by 0-5V analog signal or PWM signal.
4. This laser power supply has open cirsuit protection function. When protective earthing is good, the laser power supply can be in open circuit status during short time. This function can protect power supply when laser tube burst.
2. Aging test:
Each laser power supply must pass this test which is taken at 60 degree centigrade for 12 hours in full load status. And the power supply must start and stop at each 7 seconds for 500 times. In this way we can ensure the laser power supply is qulified.
3. Specification:
Input AC Voltage AC220V or AC110V
Input DC Voltage DC 300V or DC150V
Input AC Frequency 47-440Hz
Max. Output Voltage 30KV
Max. Output Current 20mA(Depends on Laser tube)
Efficiency 91%
Over Current Protection 130% of Max. Current
Open Circuit Protection Yes (For short time)
Cooling Fan Cooling
Voltage Range of High Level Control Not Less Than3V
Voltage Range of Low Level Control Not More Than0.8V
Working Temperature -30 - +65 Degree Centigrade
Humidity 20-85%RH(No Dew)
Withstand
Voltage Input-Output AC1500V/MinNot More Than10mA
Input-Shell AC1500V/MinNot More Than10mA
Output-Shell Connected
Insulation Not Less Than 50MOHM(DC500V)
Leakage Current Not Less Than 1mA(AC220V)Not More Than 0.5 mA(AC110V)
Shock Resistance Amplitude: 0.5mm, Frequecy:10-55Hz, 3D Dretion:2 Hours
MTBF Not Less Than30,000hours
Full Load 60 Degree Centigrade test 12Hours
7 Seconds Start/Stop Test 500 Times
Dimension(LXWXH) 165mmx45mmx75mm
Company Profile
| |
Business Type: |
Ruby laser technology co., limited.,was founded in 2002 at jinan city,shandong province of china. she is a laser power supply manufacturer with 19 people's r&d center. at first it mainly developed and manufactured co2 laser power supply, yag ldcw pumped power supply, yag arc krypton lamp pumped power supply,yag pulsed xenon lamped laser power supply. as we know, jinan is one of the largest laser machine centers in china. lots of famous brands laser machine manufacturers are in this city. thanks to this advantages, we have rich experience to develop, manufacture and sell standardized laser power supplies to machine factories .besides, we can also develope special laser power supply on customer’s requirement. actually 60-70% of laser power supplies are specially developed.
owning to rubylaser’s qualified product and excellent service, the power supplies are widely used at laser engraving machine, laser cutting machine, laser marking machine and laser welding machine,etc. currently these laser machines are applied on metal work, leather, embroidery , stamp, platemaking, advertisement, electronic, nould making and so on |
| |
Comapany: |
Ruby laser technology co., ltd |
| |
Year of Establishment: |
2002 |
| |
Address: |
Shunhua road,high-tech development zone |
| |
City: |
Jinan |
| |
Zip/Postal: |
250032 |
| |
State: |
Andaman and nicobar islands |
| |
Country: |
India |
Jinan Hongyuan Electirc Co., Ltd has specialized in power supply field since 1992. She has 19 year’s experience to develope, produce and supp
